# Usage

## Needed extra files
On Windows support for some codecs (Ogg Vorbis, MPEG audio, etc.) is done with external
libraries, so you will need to put certain DLL files together.

In the case of components like foobar2000 they are all bundled for convenience,
while other components include them but must be installed manually. You can also
get them here: https://github.com/vgmstream/vgmstream/tree/master/ext_libs
or compile them manually, even (see tech docs).

Put the following files somewhere Windows can find them:
- `libvorbis.dll`
- `libmpg123-0.dll`
- `libg719_decode.dll`
- `avcodec-vgmstream-59.dll`
- `avformat-vgmstream-59.dll`
- `avutil-vgmstream-57.dll`
- `swresample-vgmstream-4.dll`
- `libatrac9.dll`
- `libcelt-0061.dll`
- `libcelt-0110.dll`
- `libspeex-1.dll`

For command line (`vgmstream-cli.exe`) and XMPlay this means in the directory with the main
`.exe`, or possibly a directory in the PATH variable.

For Winamp, the above `.dll` also go near main `winamp.exe`, but note that `in_vgmstream.dll`
plugin itself goes in `Plugins`.

On other OSs like Linux/Mac, libs need to be installed before compiling, then should be used
automatically, though not all may enabled at the moment due to build scripts issues.


## Components

### vgmstream-cli (command line decoder)
*Windows*: unzip `vgmstream-cli` and follow the above instructions for installing needed extra files.
This tool was called `test.exe` before for historical reasons (rename back if needed).

*Others*: build instructions can be found in the [BUILD.md](BUILD.md) document (can be compiled
with CMake/Make/autotools).

Converts playable files to `.wav`. Typical usage would be:
- `vgmstream-cli -o happy.wav happy.adx` to decode `happy.adx` to `happy.wav`.

If command-line isn't your thing you can simply drag and drop one or multiple
files to the executable to decode them as `(filename.ext).wav`.

There are multiple options that alter how the file is converted, for example:
- `vgmstream-cli -m file.adx`: print info but don't decode
- `vgmstream-cli -i -o file_noloop.wav file.hca`: convert without looping
- `vgmstream-cli -s 2 -F file.fsb`: write 2nd subsong + ending after 2.0 loops
- `vgmstream-cli -l 3.0 -f 5.0 -d 3.0 file.wem`: 3 loops, 3s delay, 5s fade
- `vgmstream-cli -o bgm_?f.wav file1.adx file2.adx`: convert multiple files to `bgm_(name).wav`

Available commands are printed when run with no flags. Note that you can also
achieve similar results for other plugins using TXTP, described later.

Output filename in `-o` may use wildcards:
- `?s`: sets current subsong (or 0 if format doesn't have subsongs)
- `?0Ns`: same, but left pads subsong with up to `N` zeroes
- `?n`: internal stream name, or input filename if format doesn't have name
- `?f`: input filename

For example `vgmstream-cli -s 2 -o ?04s_?n.wav file.fsb` could generate `0002_song1.wav`.
Default output filename is `?f.wav`, or `?f#?s.wav` if you set subsongs (`-s/-S`).


### in_vgmstream (Winamp plugin)
*Windows*: drop the `in_vgmstream.dll` in your Winamp Plugins directory,
and follow the above instructions for installing needed extra files.

*Others*: may be possible to use through *Wine*.

Once installed, supported files should be playable. There is a simple config
menu to tweak some options too. If the *Preferences... > Plug-ins > Input* shows
vgmstream as *"NOT LOADED"* that means extra DLL files aren't in the correct
place.

#### Plugin priority
An (uncommon) issue is clashing extensions. When opening a file, Winamp first
asks all plugins if they support the file. Here vgmstream accepts files it can
play and rejects anything it can't, but if no plugin "claims" the file (and most
don't), Winamp will just pass it to the *first* `.dll` in the plugin folder that
reports the extension. Since vgmstream supports tons of extensions sometimes it
may receive files it can't play (even after rejecting them). This oddness can be
solved by renaming the plugins' `.dll` so vgmstream goes *last*.

For example, vgmstream ignores *sequenced* `.vgm` but supports *streamed* `.vgm` (another
format). If your *in_vgm* plugin version doesn't "claim" *sequenced* `.vgm`, Winamp
may send it to vgmstream by mistake (won't be playable), depending on how the plugin
is named. Here vgmstream has higher priority and `.vgm` will fail:
```
in_vgmstream.dll
in_vgmW.dll
```
And here has lower and `.vgm` will be playable:
```
in_vgm.dll
in_vgmstream.dll
```

Note the above is also affected by vgmstream's options *Enable common exts* (vgmstream
will accept and play common files like `.wav` or `.ogg`), and *Enable unknown exts* (will
try to play files outside the known extension list, which is often possible through *TXTH*).


### foo_input_vgmstream (foobar2000 plugin)
*Windows*: every file should be installed automatically when opening the `.fb2k-component`
bundle.

*Others*: may be possible to use through *Wine*.

Note that vgmstream currently requires at least foobar v1.5 to run.

#### Playlist issues
A known quirk is that when loop options or tags change, playlist time/info won't
update automatically. You need to manually refresh it by selecting songs and doing
**shift + right click > Tagging > Reload info from file(s)**.

#### Plugin priority
If multiple plugins supports the same format, which plugin is used depends on config.
You can change plugin's priority in **options > Playback > Decoding**. Due to the
huge amount of supported formats, you may want to set it low enough.

Note the above is also affected by vgmstream's options *Enable common exts* (vgmstream
will accept and play common files like `.wav` or `.ogg`), and *Enable unknown exts* (will
try to play files outside the known extension list, which is often possible through *TXTH*).

#### Default title and playlist columns
By default *vgmstream* auto-generates a `title` tag depending on subsongs, stream name
and other details. You can change this by setting *"override title"* in the options,
that uses foobar's default (filename without extension) and tweating the display format
in *Preferences > Display > Default User Interface* (may need to add some conditionals
to handle files with/out subsongs).

*vgmstream* automatically exports these tags:
- `STREAM_INDEX`: current subsong, if file has subsongs, starts from 1
- `STREAM_COUNT`: total subsongs, if file has subsongs
- `STREAM_NAME`: internal name, that also exists in some formats without subsongs
- `LOOP_START`: loop start, if any
- `LOOP_END`: loop end, if any

Exported tags can be used as columns as well (*.. > Playlist view > custom columns*),
and may be added as tags (which means *vgmstream* can play and loop an exported `.ogg`,
since those tags are inherited).

Custom title example: `[%artist% - ]%title% [%stream_index%][/ %stream_name%]`

You can also set an unique *Destination* pattern when converting to .wav (even without)
setting *override title*). For example `[$num(%stream_index%,2)] %filename%[-%stream_name%]` 
may create a name like `02 BGM-EVENT_SAD`.



### xmp-vgmstream (XMPlay plugin)
*Windows*: drop the `xmp-vgmstream.dll` in your XMPlay plugins directory,
and follow the above instructions for installing the other files needed.

*Others*: may be possible to use through *Wine*.

Note that this has less features compared to *in_vgmstream* and has no config.
Since XMPlay supports Winamp plugins you may also use `in_vgmstream.dll` instead.

#### Missing subsongs
XMPlay cannot support vgmstream's type of mixed subsongs due to player limitations
(with neither *xmp-vgmstream* nor *in_vgmstream* plugins). You can make one *TXTP*
per subsong to play them instead (explained below).

#### Plugin priority
Because the XMPlay MP3 decoder incorrectly tries to play some vgmstream extensions,
you need to manually fix it by going to **options > plugins > input > vgmstream**
and in the "priority filetypes" put: `ahx,asf,awc,ckd,fsb,genh,lwav,msf,p3d,rak,scd,txth,xvag`
(or any other similar case).


### Audacious plugin
*Windows*: not possible at the moment.

*Others*: needs to be manually built. Instructions can be found in [BUILD.md](BUILD.md)
document in vgmstream's source code (can be done with CMake or autotools).

#### Playlist issues
A known quirk is that when loop options or tags change, playlist time/info won't
update automatically. You need to re-add files to the playlist to refresh it.

#### Enabling subsongs
In Audacious 3.10+ subsongs only work when enabling: *Settings* > *Advanced* >
*Probe contents of files with no recognized file name extensions*.

Without that option enabled, a workaround is adding a file with subsongs, removing
it from the playlist, then adding it again. Somehow that makes Audacious unpack the
file properly (possibly a bug, may not work in current versions).

#### Plugin priority
vgmstream sets its priority on compile time, low enough for most other plugins to
go first (but not all), so there is a chance other plugins will "steal" vgmstream
formats. Can be changed passing `AUDACIOUS_VGMSTREAM_PRIORITY=N` to compilation
options (where N 0=highest, 10=lowest).


### vgmstream123 (command line player)
*Windows/Linux*: needs to be manually built. Instructions can be found in the
*[BUILD.md](BUILD.md)* document. On Windows it needs `libao.dll` and appropriate includes.

Usage: `vgmstream123 [options] INFILE ...`

The program is meant to be a simple stand-alone player, supporting playback of
vgmstream files through libao. Most options should be similar to CLI's
(`-m`, `-i`, `-s N` and so on, though not fully equivalent), use `-h` for full info.

#### Extra features
On Linux, files compressed with gzip/bzip2/xz also work, as identified by a
`.gz/.bz2/.xz` extension. The file will be decompressed to a temp dir using the
respective utility program (which must be installed and accessible) and then
loaded.

It also supports playlists, and will recognize a special extended-M3U tag
specific to vgmstream of the following form:
```
#EXT-X-VGMSTREAM:LOOPCOUNT=2,FADETIME=10.0,FADEDELAY=0.0,STREAMINDEX=0
```
(Any subset of these four parameters may appear in the line, in any order)

When this "magic comment" appears in the playlist before a vgmstream-compatible
file, the given parameters will be applied to the playback of said file. This makes
it feasible to play vgmstream files directly instead of needing to make "arranged"
WAV/MP3 conversions ahead of time.

The tag syntax follows the conventions established in Apple's HTTP Live Streaming
standard, whose docs discuss extending M3U with arbitrary tags.

### Related projects
We only manage the above components, but there are other projects using
vgmstream that may useful for other cases. A few of them:
- Web browser player: https://github.com/KatieFrogs/vgmstream-web
- AIMP plugin: https://github.com/ArtemIzmaylov/aimp_vgmstream
- DeaDBeeF plugin: https://github.com/jchv/deadbeef-vgmstream
- Python bindings: https://github.com/hugeBlack/pyvgmstream
- 3DS port: https://github.com/TricksterGuy/3ds-vgmstream
- Reaper plugin: https://github.com/maxton/reaper_vgmstream
- Simple GUI: https://github.com/BENICHN/VGMGUI

They may not be up to date though, and since they aren't part of vgmstream
issues should be directed to each project.


## Special cases
vgmstream aims to support most audio formats as-is, but some files require extra
handling.

### Subsongs
Certain container files have multiple audio subsections, usually called "subsongs", 
which *vgmstream* can play directly.

Easiest would be using the *foobar/winamp/Audacious* plugins, that automatically
"unpack" subsongs into the playlist.

With CLI tools you can select a subsong using `-s (number)`, for example:
`vgmstream-cli -s 5 file.bank` or `vgmstream123 -s 5 file.bank`. By default it
plays first subsong and reports total subsongs.

You can convert multiple subsongs at once using the `-S` flag.
**WARNING, MAY TAKE A LOT OF SPACE!** Some containers have thousands of subsongs,
so don't use this lightly. Remember to set an output name (`-o`) with subsong
wildcards, or leave it alone for good defaults.
- `vgmstream-cli -s 1 -S 100 file.bank`: writes from subsong 1 to subsong 100
- `vgmstream-cli -S 0 file.bank`: writes from subsong 1 to max subsong
- `vgmstream-cli -s 101 -S 0 file.bank`: writes from subsong 101 to max subsong (automatically changes 0 to max)
- `vgmstream-cli -s 1 -S 5 -o bgm.wav file.bank`: writes 5 subsongs, but all overwrite the same file = wrong.
- `vgmstream-cli -s 1 -S 5 -o bgm_?02s.wav file.bank`: writes 5 subsongs, each named differently = correct.

For players without subsong support, or to play only a few choice subsongs you can
create `.txtp` (explained later) to select one subsong, like `bgm.sxd#10.txtp`
(plays subsong 10 in `bgm.sxd`).

You can use this python script to autogenerate one `.txtp` per subsong:
https://github.com/vgmstream/vgmstream/tree/master/cli/tools/txtp_maker.py
Put in the same dir as *vgmstream-cli*, then to drag-and-drop files with
subsongs to `txtp_maker.py` (it has CLI options to control output too).

### Common and unknown extensions
A few extensions that vgmstream supports clash with common ones. Since players
like foobar or Winamp don't react well to that, they may be renamed to these
"designated fake extensions" to make them playable through vgmstream.
- `.aac` to `.laac` (tri-Ace games)
- `.ac3` to `.lac3` (standard AC3)
- `.aif` to `.laif` (standard Mac AIF, Asobo AIF, Ogg)
- `.aiff/aifc` to `.laiff/laifc` (standard Mac AIF)
- `.asf` to `.lasf` (EA games, Argonaut ASF)
- `.bin` to `.lbin` (various formats)
- `.flac` to `.lflac` (standard FLAC)
- `.mp2` to `.lmp2` (standard MP2)
- `.mp3` to `.lmp3` (standard MP3)
- `.mp4` to `.lmp4` (standard M4A)
- `.mpc` to `.lmpc` (standard MPC)
- `.ogg` to `.logg` (standard OGG)
- `.opus` to `.lopus` (standard OPUS or Switch OPUS)
- `.stm` to `.lstm` (Rockstar STM)
- `.wav` to `.lwav` (standard WAV, various formats)
- `.wma` to `.lwma` (standard WMA)
- `.(unknown)` to `.vgmstream` (TXTH formats / extracted bigfiles without extension)

Command line tools don't have this restriction and will accept the original
filename. Note that vgmstream also accepts certain extension-less files as-is too.

The main reason of renaming is forcing the player to use vgmstream instead of its
internal decoder. vgmstream then may use the file's loop info, or apply small
fixes, but is also limited in some ways such as regular tagged files (like `.ogg`)
won't show tags when played through vgmstream (since video game `.ogg` rarely
have anything worth showing).

Some plugins have options that allow "*common extensions*" to be played, making any
renaming unnecessary. You may need to adjust plugin priority in player's options
first, but the same issues apply (will lose tags).

Similarly, vgmstream has a curated list of known extensions, that plugins may take
into account and ignore unknowns. Through *TXTH* you can make unknown files playable,
but you also need to either rename or set plugin options to allow "*unknown extensions*"
(or, preferably, report this new extension so it can be added to the known list).

It's also possible to make a .txtp file that opens files with those common/unknown
extensions as a way to force them into vgmstream without renaming.

#### Related issues
Also be aware that other plugins (not vgmstream) can tell the player they handle
some extension, then not actually play it. This makes the file unplayable as
vgmstream doesn't even get the chance to parse it, so you may need to disable
the offending plugin or rename the file to the fake extension shown above (for
example this may happen with `.asf` in foobar2000/Winamp, may be fixed in newer
versions).

When extracting from a bigfile, sometimes internal files don't have a proper
extension. Those should be renamed to its correct one when possible, as the
extractor program may guess wrong (like `.wav` instead of `.at3` or `.wem`).
If there is no known extension, usually the header id/magic string may be used instead.

#### Windows 10 folder bugs
Windows 10's *Web Media Extensions* is a pre-installed package seems to read metadata
from files like `.ogg`, `.opus`, `.flac` and so on when opening a folder. However
it tends to noticeably slow down opening folders, also seems to crash and leave files
unusable when reading unsupported formats like Switch Opus (rather than Ogg Opus).

Renaming extensions should prevent those issues, or just uninstall those *Web
Media Extension* for better experience anyway.

#### Fallout SFX .ACM
Due to technical limitations, to play Fallout 1/2 SFX you need to rename them from
`.acm` to `.wavc` (forces mono).

### Demuxed videos
vgmstream also supports audio from videos, but usually must be demuxed (extracted
without modification) first, since vgmstream doesn't attempt to support most of them
(it does support a few video formats as-is though).

The easiest way to do this is using *VGMToolBox*'s "Video Demultiplexer" option
for common game video formats (`.bik`, `.vp6`, `.pss`, `.pam`, `.pmf`, `.usm`, `.xmv`, etc).

For standard videos formats (`.avi`, `.mp4`, `.webm`, `.m2v`, `.ogv`, etc) not supported
by VGMToolBox, FFmpeg binary may work:
- `ffmpeg.exe -i (input file) -vn -acodec copy (output file)`
Output extension may need to be adjusted to some appropriate audio file depending
on the audio codec used. `ffprobe.exe` can list this codec, though the correct audio
extension depends on the video itself (like `.avi` to `.wav/mp2/mp3` or `.ogv` to `.ogg`).

Some games use custom video formats, demuxer scripts in `.bms` format may be found
on the internet.

### Companion files
Some formats have companion files with external info, that should be left together:
- `.mus`: playlist with `.acm`
- `.ogg.sli` or `.sli`: loop info for `.ogg`
- `.ogg.sfl` : loop info for `.ogg`
- `.opus.sli`: loop info for `.opus`
- `.pos`: loop info for .wav
- `.acb`: names for `.awb`
- `.xsb`: names for `.xwb`

Similarly some formats split header+body data in separate files, examples:
- `.abk`+`.ast`
- `.bnm`+`.apm/wav`
- `.ktsl2asbin`+`.ktsl2stbin`
- `.mih`+`.mib`
- `.mpf`+`.mus`
- `.pk`+`.spk`
- `.sb0`+`.sp0` (or other numbers instead of `0`)
- `.sgh`+`.sgd`
- `.snr`+`.sns`
- `.spt`+`.spd`
- `.sts`+`.int`
- `.xwh`+`.xwb`
- `.xps`+`dat`
- `.wav.str`+`.wav`
- `.wav`+`.dcs`
- `.wbh`+`.wbd`

Both are needed to play and must be together. The usual rule is you open the
bigger file (body), save a few formats where the smaller (header) file is opened
instead for technical reasons (mainly some bank formats).

Generally companion files are named the same (`bgm.awb`+`bgm.acb`), or internally
point to another file `sfx.sb0`+`STREAM.sb0`. A few formats may have different names
which are hardcoded instead of being listed in the header file (e.g. `.mpf+.mus`).
In these cases, you can use *TXTM* format to specify associated companion files.
See *Artificial files* below for more information.

#### Dual stereo
A special case of the above is "dual file stereo", where 2 similarly named mono
files are fused together to make 1 stereo song.
- `(file)_L.dsp`+`(file)_R.dsp`
- `(file)-l.dsp`+`(file)-l.dsp`
- `(file).L`+`(file).R`
- `(file)_0.dsp`+`(file)_1.dsp`
- `(file)_Left.dsp`+`(file)_Right.dsp`
- `(file).v0`+`(file).v1`

vgmstream automatically detects these pairs and makes a stereo song from `L` + `R`.
You can open either `L` or `R` and you'll get the same stereo. If you rename one
of the files the "pair" won't be found, and both will be played as mono. This
is only done for a few choice formats (mainly `.dsp` and `.vag`) that commonly
split audio like that, though.

#### OS case sensitiveness
When using OS with case sensitive filesystem (mainly Linux), a known issue with
companion files is that vgmstream generally tries to find them using lowercase
extension.

This means that if the developer used uppercase instead (e.g. `bgm.ABK`+`bgm.AST`)
loading will fail. It's technically complex to fix this, so for the time being
the only option is renaming the companion extension to lowercase.

A particularly nasty variation of that is that some formats load files by full
name (e.g. `STREAM.SS0`), but sometimes the actual filename is in other case
(`Stream.ss0`), and some files could even point to that with yet another case.
You could try adding *symlinks* in various upper/lower/mixed cases to handle this,
though only a few formats do this, mainly *Ubisoft* banks.

Regular formats without companion files should work fine in upper/lowercase. For
`.(ext).txth` files make sure `(ext)` matches case too.

### Decryption keys
Certain formats have encrypted data, and need a key to decrypt. vgmstream
will try to find the correct key from a list, but it can be provided by
a companion file:
- `.adx`: `.adxkey` (keystring, or 8-byte keycode, or derived 6 byte start/mult/add key)
- `.ahx`: `.ahxkey` (keystring, or derived 6-byte start/mult/add key)
- `.hca`: `.hcakey` (keystring, or 8-byte keycode, a 64-bit number)
  - May set 8-byte key followed a 2-byte AWB subkey for newer HCA
  - `.awb`/`.acb` also may use `.adxkey`/`.hcakey`, and will combine with an internal AWB subkey
- `.fsb`: `.fsbkey` (decryption key in hex, usually between 8-32 bytes) 
- `.bnsf`: `.bnsfkey` (decryption key, a string up to 24 chars)
- `.awc`: `.awckey` (decryption key, 0x10 bytes divided into 4 BE ints)

The key file can be `.(ext)key` (for the whole folder), or `(name).(ext)key"
(for a single file). The format is made up to suit vgmstream.

For example, if you have an encrypted HCA and its key string is *"123456789"*, make
a text file named `.hcakey` (notice it starts with a dot), open it with a text editor
and copy that key without quotes nor line endings: `123456789`. Save it, then play the
HCA normally. vgmstream will see this key and use it automatically.


### Artificial files
In some cases a file only has raw data, while important header info (codec type,
sample rate, channels, etc) is stored in the .exe or other hard to locate places.
Or maybe the file plays normally, but has many layers at once that are silenced
dynamically during gameplay, or looping metadata is stored externally.

Cases like those can be supported using an artificial files with info vgmstream
needs.

Creation of these files is meant for advanced users, full docs can be found in
vgmstream source.

#### TXTH
Text files describing a format's header, to make unsupported files playable
(helps vgmstream understand the file you are trying to open).

Must be named `.txth` or `.(ext).txth` (used for the whole folder), or 
`(name.ext).txth` (used for a single file). `.txth` are indirectly used when
a `(file.ext)` is opened but vgmstream can't play it by default.

`.txth` contains static values, or dynamic text commands to read data from the
original file, serving as a fake header of sorts.

Usage example (used when opening an unknown file named `bgm_01.pcm`):

**.pcm.txth**
```
codec = PCM16LE         #standard PCM wave data
channels = @0x04        #read in the file, at offset 4
sample_rate = 48000     #hardcoded
start_offset = 0x10     #first 0x10 bytes are the header
num_samples = data_size #auto
```

#### TXTP
Text files that apply playback parameters, to customize how other files are
played.

Must be named `(any name).txtp` and opened directly. Useful when games play songs
in various non-standard ways, so we can tell vgmstream to handle files differently.

`.txtp` can do multiple things (can be combined, too):
- join a playlist of files (for separate intro + loop songs)
- play a list of single-channel files as a single multichannel file
- install looping to any file (for files with looping done in code)
- remove unwanted channels (for layered exploration + action songs)
- select a subsong in an audio bank
- playback config such as volume or max playable time
- apply complex real-time mixing
- many other features

Usage examples (open directly, name can be set freely):

**bgm01-full.txtp**
```
# plays 2 files as a single one
bgm01_intro.vag
bgm01_loop.vag
loop_mode = auto
```

**bgm-subsong10.txtp**
```
# plays subsong number 10
bgm.sxd#10
```

**song01-looped.txtp**
```
# force looping an .mp3 from 10 seconds up to file end
song02.mp3 #I 10.0
```

**music01-demux2.txtp**
```
# plays channels 3 and 4 only, removes rest
music01.bfstm #C3,4
```

#### TXTM
A text file named `.txtm` for some formats with companion files. It lists
name combos determining which companion files to load for each main file.

It is needed for formats where name combos are hardcoded, so vgmstream doesn't
know which companion file(s) to load if its name doesn't match the main file.
Note that companion file order is usually important.

Usage example (used when opening files in the left part of the list):
```
# Harry Potter and the Chamber of Secrets (PS2)
exterior.mpf: exterior.mus,ext_o.mus
willow.mpf: willow.mus,willow_o.mus
```
```
# Metal Gear Solid: Snake Eater 3D (3DS) names for .awb
bgm_2_streamfiles.awb: bgm_2.acb
```
```
# hashes of SE1_Common_BGM + SRSA/SRST [Hyrule Warriors: Age of Calamity (Switch)]
# (more exactly "R_SRSA［SE1_Common_BGM］" and "R_SRST［SE1_Common_BGM］")
0x3a160928.srsa: 0x272c6efb.srst
```
```
# Snack World (Switch) names for .awb (single .acb for all .awb, order matters)
bgm.awb: bgm.acb
bgm_DLC1.awb: bgm.acb
```
In rare cases you need to setup some extra flags
```
event_stream2.awb: event_stream2.acb
event_stream2_dlc1.awb: event_stream2.acb
event_stream2_dlc2.awb: event_stream2.acb
event_stream2_dlc3.awb: event_stream2.acb
# next "flag" allows both effect.acb and even_stream2.acb in the same file
#@reset-pos
effect.awb: effect.acb
effect_dlc2.awb: effect.acb
effect_dlc3.awb: effect.acb
```

#### GENH
A byte header placed right before the original data, modifying it.
The resulting file must be `(name).genh`. Contains static header data.

Programs like VGMToolbox can help to create *GENH*, but consider using *TXTH*
instead, *GENH* is mostly deprecated. *TXTH* is recommended over *GENH* as
it's far easier to create and has many more functions, plus doesn't modify
original data.


### Plugin conflicts
Since vgmstream supports a huge amount of formats it's possibly that some of
them are also supported in other plugins, and this sometimes causes conflicts.
If a file that should isn't playing or looping, first make sure vgmstream is
really opening it (should show "VGMSTREAM" somewhere in the file info), and
try to remove a few other plugins.

foobar's FFmpeg plugin and foo_adpcm are known to cause issues, but in
modern versions (+1.4.x) you can configure plugin priority (go to *Preferences*
then *playback > decoding* and move *vgmstream* higher or other plugins lower).

In Audacious, vgmstream is set with slightly higher priority than FFmpeg,
since it steals many formats that you normally want to loop (like `.adx`).
However other plugins may set themselves higher, stealing formats instead.
If current Audacious version doesn't let to change plugin priority you may
need to disable some plugins (requires restart) or set priority on compile
time. Particularly, mpg123 plugin may steal formats that aren't even MP3,
making impossible for vgmstream to play them properly.

### Channel issues
Some games layer a huge number of channels, that are disabled or downmixed
during gameplay. The player may be unable to play those files (for example
older foobar versions can only play up to 8 channels, and Winamp depends on
your sound card). For those files you can set the "downmix" option in
vgmstream, that can reduce the number of channels to a playable amount.

Note that this type of downmixing is very generic (not meant to be used when
converting to other formats), channels are re-assigned and volumes modified
in simplistic ways, since it can't guess how the file should be properly
adjusted. Most likely it will sound a bit quieter than usual.

You can also choose which channels to play using *TXTP*. For example, create
a file named `song.adx#C1,2.txtp` to play only channels 1 and 2 from `song.adx`.
*TXTP* also has command to set how files are downmixed, like `song.adx #@downmix.txtp`
for standard 5.1/4.0/etc audio to stereo, or manual (per-channel) mixing.

### Average bitrate
Note that vgmstream shows the "file bitrate" (counts all data) as opposed to
"codec bitrate" (counts pure audio-only parts). This means bitrate may be
slightly higher (or much higher, if file is bloated) than what encoder
tools or other players may report.

Calculating 100% correct codec bitrate usually needs manual reading of the whole
file, slowing down opening files and needing extra effort by devs for minimal
benefit, so it's not done.

In some cases it's debatable what the codec bitrate is. Unlike MP3/AAC, 48kbps
of raw Vorbis/Opus is unplayable/unusable unless it's packed into .ogg/wem/etc
with extra data, that does increase final file size (thus bitrate) by some percent.

Also, keep in mind video game audio bitrate isn't always a great indicator of quality.
There are many factors in play like encoder, type of codec, sample rate and so on.
A higher bitrate `.wav` can sound worse than a lower `.ogg` (like mono 22050hz `.wav`
vs stereo 48000hz `.ogg`).

### Containers
Some formats are *audio containers* of other common audio formats. For example
`.acb`/`.awb` may contain standard `.hca` inside. Rather than extracting the
internal "files", it's recommended that you keep data unmodified for preservation
purposes. Sometimes containers have useful data (like loop info or names), that
you may be unknowingly throwing away if you extract internal files.

It's a good practice (and simpler) to just let containers be and play them
directly with vgmstream. Newer `.acb`/`.awb` have extra data needed to decrypt
the `.hca`, so if you are already used to those containers you don't need to
worry about extracted `.hca` not working later. Plus you can use TXTH's "subfile"
function to easily make unsupported containers playable:
```
# Simple container with an Ogg inside. Maybe values 0x00..0x10 could contain
# loops or other useful info, that other users are able to figure out:
subfile_extension = ogg
subfile_offset = 0x10
```
With unmodified data, you can always extract the internal files later if you
change your mind, but you can't get the (potentially useful) container data back
once extracted.

However, if your file is a *generic container* (like a `.zip`, that could hold
graphics or audio) you may safely extract the internal files without worry.

Note that some formats are *audio banks* rather than *containers* (like `.fsb`),
in that info for playing the audio is part of the bank header, and extracting
internal files as-is isn't really possible. Or, perhaps you could to transmogrify
the original header into something else, but for data preservation purposes
it's preferable to leave it as-is (plus can use TXTH to play unsupported formats).

If your main motivation for extracting is to rename or have loose files, remember
you can simply use TXTP to point to a subsong, and name that `.txtp` whatever you
want, without having to touch original data or needing custom extractors.

### Cue formats
Some formats that vgmstream supports (SQEX's .sab, CRI's .acb+awb, Wwise's .bnk+wem,
Microsoft's .xss+.xwb....) are "cue" formats. The way these work is (more or less),
they have a bunch of named audio "cues"/"events" in a section of the file, that are
called to play one or multiple audio "waves"/"materials" in another section.

Rather than handling cues, vgmstream shows and plays waves, then assigns cue names
that point to the wave if possible, since vgmstream mainly deals with streamed/wave
audio and simulating cues is out of scope. Figuring out a whole cue format can be a
*huge* time investment, so handling waves only is good enough.

Cues can be *very* complex, like N cues pointing to 1 wave with varying pitch, or
1 cue playing one random wave out of 3. Sometimes not all waves are referenced by
cues, or cues do undesirable effects that make only playing waves a good compromise.
Simulating cues is better handled with external tools that allow more flexibility
(for example, this project simulates Wwise's extremely complex cues/events by creating
.TXTP telling vgmstream which config and waves to play, and one can filter desired
cues/TXTP: https://github.com/bnnm/wwiser).

## Logged errors and unplayable supported files
Some formats should normally play, but somehow don't. In those cases plugins
can print vgmstream's error info to console (for example, `.fsb` with an unknown
codec, `.hca/awb` with missing decryption key, bank has no audio, `.txth` is
malformed, or `.wav` has an incorrectly ripped size).

Console location and format depends on plugin:
- *foobar2000*: found in *View menu > Console*
- *Winamp*: open vgmstream's config (*Preferences... > Plug-ins > vgmstream* + *Configure*
  button) then press "Open Log"
- *Audacious*: start with `audacious -V` from terminal
- CLI utils: printed to stdout directly

Only a few errors types are printed but may be helpful for more common cases.

## Tagging
Some of vgmstream's plugins support simple read-only tagging via external files.

Tags are loaded from a text/M3U-like file named *!tags.m3u* in the song folder.
You don't have to load your songs with this M3U though, but you can (for pre-made
order). The format is meant to be both a quick playlist and tags, but the tagfile
itself just 'looks' like an M3U. you can load files manually or using other playlists
and still get tags.

Currently there is no way to simplify adding tags and you need to manually add them,
but format is just a text file. You can use your player to save a playlist in `.m3u`
format sinde the folder with your files, then edit it with any text editor.

Format is:
```
# comment (ignored)
# $GLOBAL_COMMAND (extra features)
# @GLOBAL_TAG text (applies all following tracks)

# %LOCAL_TAG text (applies to next track only)
filename1.ext
# %LOCAL_TAG text (applies to next track only)
filename2.ext
```
Accepted tags depend on the player (foobar: any; Winamp: see ATF config, Audacious:
few standard ones), typically *ALBUM/ARTIST/TITLE/DISC/TRACK/COMPOSER/etc*, lower
or uppercase, separated by one or multiple spaces. Repeated tags overwrite previous
(ex.- may define *@COMPOSER* multiple times for "sections"). It only reads up to
current *filename* though, so any *@TAG* below would be ignored.

*GLOBAL_COMMAND*s currently can be:
- *AUTOTRACK*: sets *%TRACK* tag automatically (1..N as files are encountered
  in the tag file).
- *AUTOALBUM*: sets *%ALBUM* tag automatically using the containing dir as album.
- *EXACTMATCH*: disables matching .txtp with regular files (explained below).

Playlist title formatting (how tags are shown) should follow player's config, as
vgmstream simply passes tags to the player. It's better to name the file lowercase
`!tags.m3u` rather than `!Tags.m3u` (Windows accepts both but Linux is case sensitive).

Example:
```
# @ALBUM    God Hand
# @ARTIST   Masafumi Takada, Jun Fukuda
# * Global tags apply to all songs, unless overwritten
#   Better use ARTIST instead of ALBUMARTIST (more compatible)
#   Tags usually go in CAPS for readability but no differences
#
# $AUTOTRACK
# * This adds TRACK tags automatically from 1 to N

# %ARTIST   Masafumi Takada
# %TITLE    Be ready for it
godhand_ver1.adx

#... (more songs)

# %ARTIST   Jun Fukuda
# %TITLE    Duel Storm
Boss8_DevilHandHONKI_Ver9.adx

#... (more songs)

```

Note that with global tags you don't need to put all files or info inside. This would be
a perfectly valid *!tags.m3u*:
```
# @ALBUM    Game
# @ARTIST   Various Artists
```

### Compatibility and non-English filenames and tags
For best compatibility save `!tags.m3u` as *"ANSI"* or *"UTF-8" (with BOM)*.

Tags and filenames using extended characters (like Japanese) should work, as long
as `!tags.m3u` is saved as *"UTF-8 with BOM"* (UTF-8 is a way to define non-English
characters, and BOM is a helper "byte-order" mark). Windows' *notepad* creates files
*"with BOM"* when selecting UTF-8 encoding in *save as* dialog, or you may use other
programs like *notepad++.exe* to convert them.

More exactly, vgmstream needs the file saved in *UTF-8* to match tags and filenames
(and ignores *BOM*), while foobar/Winamp won't understand UTF-8 *filenames* unless
`.m3u` is saved *with BOM* (ignoring tags). Whereas if saved in what Windows calls
"Unicode" (UTF-16) neither may work.

Conversely, if your *filenames* only use English/ANSI characters you may ommit *BOM*,
and if your tags are English only you may save the `.m3u` as ANSI. Or if you only use
`!tags.m3u` for tags and not for opening files (for example opening them manually
or with a `playlist.m3u8`) you won't need BOM either.

Other players may not need BOM (or CRLF), but for consistency use them when dealing
with non-ASCII names and tags.

### Tags with spaces
Some players like foobar accept tags with spaces. To use them surround the tag
with both characters.
```
# @GLOBAL TAG WITH SPACES@ text
# ...
# %LOCAL TAG WITH SPACES% text
filename1
```
As a side effect if text has @/% inside you also need them: `# @ALBUMARTIST@ Tom-H@ck`

For interoperability with other plugins, consider using only common tags without spaces,
and tags that are commonly accepted in all players like ARTIST instead of ALBUMARTIST.

### ReplayGain
foobar2000/Winamp can apply the following replaygain tags (if ReplayGain is
enabled in preferences):
```
# %replaygain_track_gain N.NN dB
# %replaygain_track_peak N.NNN
# @replaygain_album_gain N.NN dB
# @replaygain_album_peak N.NNN
```

### TXTP matching
To ease *TXTP* config, tags with plain files will match `.txtp` with config, and tags
with `.txtp` config also match plain files:

**!tags.m3u**
```
# @TITLE    Title1
BGM01.adx #P 3.0.txtp
# @TITLE    Title2
BGM02.wav
```
**config.m3u**
```
# matches "Title1" (1:1)
BGM01.adx #P 3.0.txtp
# matches "Title1" (plain file matches config tag)
BGM01.adx
# matches "Title2" (config file matches plain tag)
BGM02.wav #P 3.0.txtp
# doesn't match anything (different config can't match)
BGM01.adx #P 10.0.txtp
```

Since it matches when a tag is found, some cases that depend on order won't work.
You can disable this feature manually then:

**!tags.m3u**
```
# $EXACTMATCH
#
# %TITLE    Title3 (without config)
BGM01.adx
# %TITLE    Title3 (with config)
BGM01.adx #I 1.0 90.0 .txtp
```
**config.m3u**
```
# Would match "Title3 (without config)" without "$EXACTMATCH", as it's found first
# Could use "BGM01.adx.txtp" as first entry in !tags.m3u instead (different configs won't match)
BGM01.adx #I 1.0 90.0 .txtp
```

### Issues
If your player isn't picking tags make sure vgmstream is detecting the song
and "vgmstream version" or such text shows in the file properties (as other
plugins can steal its extensions, see above), `.m3u` is properly named and
that filenames inside match the song filename. For Winamp you need to make
sure *options > titles > advanced title formatting* checkbox is set and the
format defined.

When tags change behavior varies depending on player:
- *Winamp*: should refresh tags when a different file is played.
- *foobar2000*: needs to force refresh (for reasons outside vgmstream's control)
  - **select songs > shift + right click > Tagging > Reload info from file(s)**.
- *Audacious*: files need to be re-added to the playlist

Currently there is no tool to aid in the creation of these tags, but you can create
a base `.m3u` and edit as a text file. You may try this python script to make the
base file: https://raw.githubusercontent.com/bnnm/vgm-tools/master/py/tags-maker.py

vgmstream's "m3u tagging" is meant to be simple to make and share (just a text
file), easier to support in multiple players (rather than needing a custom plugin),
allow OST-like ordering but also mixable with other `.m3u`, and be flexible enough
to have commands. If you are not satisfied with vgmstream's tagging format,
foobar2000 has other plugins (with write support) that may be of use:
- m-TAGS: http://www.m-tags.org/
- foo_external_tags: https://foobar.hyv.fi/?view=foo_external_tags


## Virtual TXTP files
Some of vgmstream's plugins (and CLI) allow you to use virtual `.txtp` files, that
combined with playlists let you make quick song configs.

Normally you can create a physical .txtp file that points to another file with
config, and `.txtp` have a "mini-txtp" mode that configures files with only the
filename.

Instead of manually creating `.txtp` files you can put non-existing virtual `.txtp`
in a `.m3u` playlist:
```
# playlist that opens subsongs directly without having to create .txtp
# notice the full filename, then #(config), then ".txtp" (spaces are optional)
bank_bgm_full.nub  #s1  .txtp
bank_bgm_full.nub  #s10 .txtp
```

Combine with tagging (see above) for extra fun OST-like config.
```
# @ALBUM    GOD HAND

# play 1 loop, delay and do a longer fade
# %TITLE    Too Hot !!
circus_a_mix_ver2.adx       #l 1.0 #d 5.0 #f 15.0 .txtp

# play 1 loop instead of the default 2 then fade with the song's internal fading
# %TITLE    Yet... Oh see mind
boss2_3ningumi_ver6.adx     #l 1.0  #F .txtp

...
```

You can also use it in CLI for quick access to some txtp-exclusive functions:
```
# force change sample rate to 22050 (don't forget to use " with spaces)
vgmstream-cli -o btl_koopa1_44k_lp.wav "btl_koopa1_44k_lp.brstm  #h22050.txtp"
```

Support for this feature is limited by player itself, as foobar and Winamp allow
non-existent files referenced in a `.m3u`, while other players may filter them
first.

You can use this python script to autogenerate one `.txtp` per virtual-txtp:
https://github.com/vgmstream/vgmstream/tree/master/cli/tools/txtp_dumper.py
Drag and drop the `.m3u`, or any text file with .txtp  (it has CLI options
to control output too).


## Sequences and streams
Roughly, there are two types of game audio:
- streams: prerecorded audio where all instruments are pre-mixed into a single
  file, often compressed with some custom format.
- sequences: series of instrument notes, typically in MIDI-like formats with
  a bank of instrument sounds.

As the name implies, vgmstream plays "streams". Old games mainly use sequences
(very small and more dynamic), while other games use streams (easier to handle
but lot bigger and sometimes CPU-intensive).

vgmstream's internals are tailored to play streams so, in other words, it's not
possible to add support for sequenced audio unless massive changes were done,
basically becoming another program entirely. There are other projects better
suited for playing sequences.


## External loop points
Most games use audio formats that define loop points inside its files. That is,
you get looped/repeated audio in vgmstream simply by opening the files.

However some games use formats that don't define loops points, and instead store
loops in the executable or some external file. For example they could have a bunch
of `.ogg` and some text with start/end loop time info for all `.ogg`, or `.opus`
files with loop samples defined in a `.bfsar`.

Since those cases are typically custom/per game, vgmstream can't really read those
loop points automatically. Instead, one should make (manually or with some script)
one TXTP per file that tells vgmstream about its external loop points, and play
the `.txtp`:
**BGM_BTL_ACMaster_opus.txtp**: `BGM_BTL_ACMaster_opus.lopus #I 258724 2929972`

Some games also use intro + loop "segments" in separate files that can be combined
with `.txtp` as well.

This may even happen with formats that do have loops in other games (for example
relatively common with `.fsb` and mobile games, that may define loops in a .json file).


## Modding game audio and encoding wav files to video game formats
vgmstream cannot *encode* (convert *from* `.wav` *to* a game format), it only *decodes*
(plays game audio). It also can't repack/mod game files (like `.wem`) into other game
formats (like `.bnk`).

One may think it's easy to do, since vgmstream reads game audio might as well write audio
too, but *encoding* and *decoding* are very different.

To *decode* vgmstream just reads a few existing values from the file's *header*,
to setup and play the file's *body* data, decompressing the game's audio codec.

To *encode* the program would need to make the *header* from scratch (having to include
lots of values the game needs but aren't needed for vgmstream to play audio), and take
PCM audio (.wav) and compress it (*very* different than decompressing) to make a *body*.

In other words you need a dedicated tool that can *encode* to your particular format.
Since *encoding* is lot harder than *decoding* it's not very common to find public tools,
and may need to program one yourself.


## Stream names
Sometimes vgmstream reads and shows some *stream name*, some internal text that identifies the *stream* (song). Typically this is some identifier text that developers used for the song, but not always meaningful.

*Stream names* don't necessarily work like *filenames*. For example the name may just be generic unused text that doesn't really apply to the sound. Or multiple subsongs may share the same *stream name*, such as `shot_sfx` may apply to 3 *streams*/subsongs, which often means game may use either of those randomly). Or even a single *stream*/subsong may have multiple associated names like `bgm_boss1; bgm_boss1_alt`.

In some cases *vgmstream* may make a *stream name* based on parts or IDs for easier handling, like marking songs with `dummy` or `[pre]`. The letter are "prefetch" files that are just a tiny part of another file (to cache and hide loading times), and can be ignored.
